Tellink, S.L.
    About TELLINK
    Locations
    Request form
    Contact
  Products
    Calls shops
    Cyber shops
    TCP Adapters
    Dialers
    Modems
 
  Downloads
    Manuals
    Software
LOCUTAX / LOCUTAX PLUS
   LOCUTAX SYSTEM               (MONO CARRIER)

   LOCUTAX PLUS SYSTEM      (MULTI CARRIER)

      The TELLINK LOCUTAX PLUS system is a series of equipment that allows to completely
manage telephone call shop. It is possible to automatically select the most cost-effective route in
each call (LCR). It carries out the administrative operation of the call shop (generating bills, call
histories, viewing the number dialed by booth, cost, call duration, etc).
System comprised of:

     •Control Unit (LOCUTAS PLUS).
     • Viewing Display, one per booth, showing the parameters of each call (duration, cost,
     remaining credit, etc).
     • Call shop local management software.
Technical characteristics.

     • Selecting the lowest cost route in each telephone call.
     • It allows 4 time brackets per day, different ones for weekends and holidays.
     • Up to 16 different operators.
     • Up to 1500 international destinations and 200 local and regional destinations.
     • Billing is automatically or manually generated.
     • Generation of usage ticket and history of calls made indicating the destination, duration,
     output operator, and booth used.
     • Capacity to manage up to 8 booths.
     • Routing selected through interconnection or node access.
     • Individual routing per booth.
     • Billing start through pole reversal, DTMF tone send, push-button trigger on display,
     # key on the telephone, automatic voice sensing (CALL-PROGRESS).
     • Automatic generation of local and regional prefixes for all billing districts.
     • Automatic or manual invoice generation upon call on-hook.
     • Prepay system per booth.
     • Generation of reports by destination, previous, operator, user, invoicing, etc.
Mechanical and electric characteristics.
       
LOCUTAX / LOCUTAX PLUS    
  · Dimensions: 145x200x40 mm.
  · Signposting: Diodo Led red 3 mm.
  · Electrical tension: 220VAC +/- 10%, 50 Hz
  · Temperature: 0º a 45º.
  · Dampness: 0% a 85% without condensation.
  · Tension of service: 24VDC, ± 5VDC.
  · Conectors  
    VDC Jack 5 mm.
    Equip In: RJ11 6/6.
    Out: RJ11 6/6.
    Interface: SUB DB9 (RS232).
       
UVITAX / UVITAX PLUS    
  · Dimensione: 130X90X38 mm.
  · Screen: Viewing Display 62x12 mm.
  · Electrical tension: It´s not necessary.
  · Conectore:  
    Equip In: RJ11 6/6.
      Out: RJ11 6/6.

Functional characteristics.

Post-payment operation.
      It indicates the call's duration, destination, and cost. With on-hook from either end, it
automatically generates the bill or allows to obtain a detailed listing of all calls pending billing
made from that booth.

Prepay operation.
     It indicates the duration of the call in progress, the usage time remaining, and the
destination. It issues a sound signal when the credit is about to expire.

Routing tables and destination costs. Minimum cost routes.
      It allows up to 16 different operators, with the possibility of selecting different destinations
for each one and associating a time bracket per destination. Therefore, it is possible to use the
most convenient operator according to the time and destination.
      It allows to select operators according to booths.

Scalability.
      Modular from 8 to 32 lines.
      Management capacity of up to 32 booths

Monitoring screen.
      From the screen located in the call shop control computer, it is possible to view in graphic
format the status of each telephone booth and the conditions of the call in progress (duration,
cost, destination, etc).

TELLINK Sistemas de comunicación